carrier image

Hex/Quad Meshing

Papers related to hexahedral and quadrilateral finite element meshing

MESHING
RESEARCH
CORNER

Anderson, Bret D., Steven E. Benzley, and Steven J. Owen

    "Automatic All Quadrilateral Mesh Adaptionthrough Refinement and Coarsening", Proceedings, 18th International Meshing Roundtable, Springer-Verlag, pp.557-574, October 25-28 2009
    keywords:
    • quadrilateral
    • adaptivity
    • refinement
    • coarsening.
    Abstract
    Download Full Paper (Postscript Format)


Araujo, Chrystiano and Waldemar Celes
    "Quadrilateral Mesh Generation with Deferred Constraint Insertion", 23rd International Meshing Roundtable, Elsevier Ltd., October 12-15 2014
    keywords:
    • quadrilateral mesh
    • triangular mesh
    • mesh with constraints
    Abstract
    Download Full Paper (Postscript Format)


Armstrong, Cecil G., Harold J. Fogg, Christopher M. Tierney and Trevor T. Robinson
    "Common themes in multi-block structured quad/hex mesh generation", 24th International Meshing Roundtable, Elsevier Ltd., October 12-14 2015
    keywords:
    • quad meshing
    • hex meshing
    • medial axis
    • paving
    • plastering
    • cross fields
    • frame fields
    Abstract
    Download Full Paper (Postscript Format)


Balendran, Bala
    "A Direct Smoothing Method For Surface Meshes", Proceedings, 8th International Meshing Roundtable, South Lake Tahoe, CA, U.S.A., pp.189-193, October 1999
    keywords:
    • mesh smoothing
    • direct method
    • surface mesh
    • quadrilateral
    • triangular
    Abstract
    Download Full Paper (Postscript Format)


Baudouin, Tristan Carrier, Jean-Francois Remacle, Emilie Marchandise, and Jonathan Lambrechts
    "Lp Lloyd's Energy Minimization for Quadrilateral Surface Mesh Generation", 20th International Meshing Roundtable, Springer-Verlag, pp.473-486, October 23-26 2011
    keywords:
    • centroidal Voronoi tessellations
    • non-linear optimization
    • quad meshgeneration
    Abstract
    Download Full Paper (Postscript Format)


Benzley, Steven E., Ernest Perry, Karl Merkley, Brett Clark and Greg Sjaardema
    "A Comparison of All-Hexahedral and All-Tetrahedral Finite Element Meshes for Elastic and Elasto-Plastic Analysis", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.179-191, October 1995
    keywords:
    • error bounds
    • finite elements
    • hexahedron
    • tetrahedron
    Abstract
    Download Full Paper (Postscript Format)


Bern, Marshall and David Eppstein
    "Flipping Cubical Meshes", Proceedings, 10th International Meshing Roundtable, Sandia National Laboratories, pp.19-29, October 7-10 2001
    keywords:
    • quadrilateral
    • hexahedral
    • flip graph connectivity
    • mesh improvement
    • improvement
    • clean-up
    • topology improvement
    Abstract
    Download Full Paper (Postscript Format)


Bern, Marshall and David Eppstein
    "Quadrilateral Meshing by Circle Packing", Proceedings, 6th International meshing Roundtable, Sandia National Laboratories, pp.7-20, October 1997
    keywords:
    • bubble packing
    • quadrilateral
    • sphere packing
    • Voronoi diagram
    Abstract
    Download Full Paper (Postscript Format)


Bernard, P.-E. and J.-F. Remacle, N. Kowalski, C. Geuzaine
    "Hex-dominant meshing approach based on frame field smoothness", 23rd International Meshing Roundtable, Elsevier Ltd., October 12-15 2014
    keywords:
    • hexahedral meshing
    • mixed hexahedral meshes
    • tetrahedra recombination
    Abstract
    Download Full Paper (Postscript Format)


Blacker, Ted
    "The Cooper Tool", 5th International Meshing Roundtable, Sandia National Laboratories, pp.13-30, October 1996
    keywords:
    • cooper
    • hexahedron
    • mapped
    • sweeping
    Abstract
    Download Full Paper (Postscript Format)


Blacker, Ted
    "Meeting the Challenge for Automated Conformal Hexahedral Meshing", Proceedings, 9th International Meshing Roundtable, Sandia National Laboratories, pp.11-19, October 2000
    keywords:
    • hexahedra
    • overview
    Abstract
    Download Full Paper (Postscript Format)


Borden, Michael J., Steven E. Benzley, Jason F. Shepherd
    "Hexahedral Sheet Extraction", Proceedings, 11th International Meshing Roundtable, Springer-Verlag, pp.147-152, September 15-18 2002
    keywords:
    • mesh generation
    • hexahedral meshing
    • mesh coarsening
    Abstract
    Download Full Paper (Postscript Format)


Borden, Michael, Steven Benzley, Scott A. Mitchell, David R. White and Ray Meyers
    "The Cleave and Fill Tool: An All-Hexahedral Refinement Algorithm for Swept Meshes", Proceedings, 9th International Meshing Roundtable, Sandia National Laboratories, pp.69-76, October 2000
    keywords:
    • hexahedra
    • refinement
    • sweeping
    • cleave and fill
    Abstract
    Download Full Paper (Postscript Format)


Borouchaki, Houman, Pascal J. Frey and Paul Louis George
    "Unstructured Triangular-Quadrilateral Mesh Generation. Application to Surface Meshing.", 5th International Meshing Roundtable, Sandia National Laboratories, pp.229-242, October 1996
    keywords:
    • adaptivity
    • anisotropy
    • quadrilateral
    • surface meshing
    • triangle
    Abstract
    Download Full Paper (Postscript Format)


Borouchaki, Houman, Pascal Lafon, Patrick Laug and Paul-Louis George
    "Minimal Variational Surfaces and Quality Triangular Meshes", Proceedings, 9th International Meshing Roundtable, Sandia National Laboratories, pp.217-225, October 2000
    keywords:
    • minimal variational surfaces
    • quality meshes
    • equilateral meshes
    • regular meshes
    • adaptivity
    • convex quadratic optimization
    • optimization
    • surface meshing
    • size map
    Abstract
    Download Full Paper (Postscript Format)


Bunin, Guy
    "Non-Local Topological Clean-Up", Proceedings, 15th International Meshing Roundtable, Springer-Verlag, pp.3-20, September 17-20 2006
    keywords:
    • topology operators
    • quadrilaterals
    • quad clean-up
    Abstract
    Download Full Paper (Postscript Format)


Cai, Shengyong and Timothy J. Tautges
    "Surface Mesh Generation based on Imprinting of S-T Edge Patches", 23rd International Meshing Roundtable, Elsevier Ltd., October 12-15 2014
    keywords:
    • Imprinting
    • MultiSweeping
    • Hexahedral
    • Mesh Generation
    • n-to-n
    • Edge Patches
    Abstract
    Download Full Paper (Postscript Format)


Cai, Shengyong and Timothy J. Tautges
    "Robust One-to-One Sweeping with Harmonic S-T Mappings and Cages", 22nd International Meshing Roundtable, Springer-Verlag, pp.1-18, October 13-16 2013
    keywords:
    • harmonic
    • sweeping
    • hexahedral
    • mesh generation
    • one-to-one
    Abstract
    Download Full Paper (Postscript Format)


Canann, Scott A., Joseph R. Tristano, Matthew L. Staten
    "An Approach to Combined Laplacian and Optimization-Based Smoothing for Triangular, Quadrilateral, and Quad-Dominant Meshes", 7th International Meshing Roundtable, Sandia National Labs, pp.479-494, October 1998
    keywords:
    • smoothing
    • Laplacian smoothing
    • optimization-based smoothing
    • triangle
    • quadrilateral
    • metric
    Abstract
    Download Full Paper (Postscript Format)


Caplan, Philip, Robert Haimes, Dacid L. Darmofal, and Steven R. Allmaras
    "Anisotropic advancing front quadrangulationwith optimization-based smoothing", Research Notes, 22nd International Meshing Roundtable, Springer-Verlag, pp.Research Note, October 13-16 2013
    keywords:
    • anisotropic
    • quadrangulation
    • optimization-based smoothing
    Abstract
    Download Full Paper (Postscript Format)


Carbonera, Carlos D. and Jason F. Shepherd
    "A Constructive Approach to Constrained Hexahedral Mesh Generation", Proceedings, 15th International Meshing Roundtable, Springer-Verlag, pp.435-452, September 17-20 2006
    keywords:
    • hexahedra
    • STC
    • Schneiderís pyramid
    • constrained hexahedral meshing
    Abstract
    Download Full Paper (Postscript Format)


Cargemel, Pierre, Youssef Mesri, Herve Guillard
    "Conformal Hexahedral Mesh Coarsening by Agglomeration", 23rd International Meshing Roundtable, Elsevier Ltd., pp.Research Note, October 12-15 2014
    keywords:
    • hexahedra
    • agglomeration
    Abstract
    Download Full Paper (Postscript Format)


Casarotti, Emanuele, Marco Stupazzini, Shiann Jong Lee, Dimitri Komatitsch, Antonio Piersanti, and Jeroen Tromp
    "CUBIT and Seismic Wave Propagation BasedUpon the Spectral-element Method: An Advanced Unstructured Mesher for Complex 3D Geological Media", Proceedings, 16th International Meshing Roundtable, Springer-Verlag, pp.579-598, October 14-17 2007
    keywords:
    • geometry simplification
    • sweep decomposition
    • design through analysis
    • hexahedra
    • sweeping
    • assembly meshing
    • imprint/merge
    • meshing user interface
    Abstract
    Download Full Paper (Postscript Format)


Chae, Soo-Won and Jung-Hwan Jeong
    "Unstructured Surface Meshing Using Operators", Proceedings, 6th International Meshing Roundtable, Sandia National Laboratories, pp.281-291, October 1997
    keywords:
    • quadrilateral
    • surface
    Abstract
    Download Full Paper (Postscript Format)


Chen, Jinming, Hua Zhu, Chuming Gao, and Haiyan Wu
    "An Improved Hexahedral Mesh Matching Algorithm", 22nd International Meshing Roundtable, Springer-Verlag, pp.183-201, October 13-16 2013
    keywords:
    • mesh matching
    • sheet operation
    • hexahedral mesh
    • finite method analysis
    Abstract
    Download Full Paper (Postscript Format)


Chen, Zhijian, Joseph R. Tristano and Wa Kwok
    "Combined Laplacian and optimization-based smoothing for quadratic mixed surface meshes", Proceedings, 12th International Meshing Roundtable, Sandia National Laboratories, pp.201-213, Sept. 2003
    keywords:
    • smoothing
    • optimization-based smoothing
    • constrained-Laplacian smoothing
    • smoothing objective function
    • surface meshing
    • smoothing quadratic elements
    Abstract
    Download Full Paper (Postscript Format)


Chiba, N., I. Nishigaki, Y. Yamashita, C. Takizawa, K. Fujishiro
    "An Automatic Hexahedral Mesh Generation System Based on the Shape-Recognition and Boundary-Fit Methods", 5th International Meshing Roundtable, Sandia National Laboratories, pp.281-290, October 1996
    keywords:
    • boundary fit
    • decomposition
    • hexahedron
    • mapping
    • shape recognition
    • sweeping
    Abstract
    Download Full Paper (Postscript Format)


Christian Sorger, Stefan Kollmannsberger, and Ernst Rank
    "Visual DoMesh - A meshing software for mixed high-order finite element discretization", Research Notes, 19th International Meshing Roundtable, Springer-Verlag, pp.Research Note, October 3-6 2010
    keywords:
    • Mesh generation
    • high-order
    • tetrahedral
    • hexahedral
    Abstract
    Download Full Paper (Postscript Format)


Clark, Brett and Ivan Yorgason
    "Uniting Dissimilar Hex Meshes to Achieve a Many-to-Many Swept Topology", Research Notes, 22nd International Meshing Roundtable, Springer-Verlag, pp.Research Note, October 13-16 2013
    keywords:
    • mesh modification
    • unite
    • many-to-many sweep
    • dissimilar meshes
    • hexahedral mesh
    Abstract
    Download Full Paper (Postscript Format)


Clark, Brett W. and Steven E. Benzley
    "Development and evaluation of a degenerate seven-node hexahedron finite element", 5th International Meshing Roundtable, Sandia National Laboratories, pp.321-332, October 1996
    keywords:
    • hexahedron
    • knife element
    Abstract
    Download Full Paper (Postscript Format)


D'Azevedo, E. F.
    "On Adaptive Mesh Generation in Two Dimensions", Proceedings, 8th International Meshing Roundtable, South Lake Tahoe, CA, U.S.A., pp.109-117, October 1999
    keywords:
    • adaptivity
    • triangle
    • quadrilateral
    Abstract
    Download Full Paper (Postscript Format)


D'Azevedo, Ed
    "On Optimal Bilinear Quadrilateral Meshes", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.19-33, October 1998
    keywords:
    • anisotropy
    • quadrilateral
    • super-convergence
    • bilinear
    Abstract
    Download Full Paper (Postscript Format)


Dhondt, Guido D.
    "Unstructured 20-Node Brick Element Meshing", Proceedings, 8th International Meshing Roundtable, South Lake Tahoe, CA, U.S.A., pp.369-376, October 1999
    keywords:
    • hexahedra
    • mesh generation
    • cutting
    • smoothing
    • quadratic
    • inside-out
    • grid-based
    Abstract
    Download Full Paper (Postscript Format)


Diaz-Morcillo, Alejandro, Agustin Bernal-Ros and Luis Nuno
    "Mesh Generation Methods Over Plane and Curved Surfaces", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.397-407, October 1998
    keywords:
    • quadrilateral
    • triangle
    • surface meshing
    • advancing front
    • transfinite interpolation
    • multiblock
    • structured
    • ruled surface
    • quadric surface
    • revolution surface
    Abstract
    Download Full Paper (Postscript Format)


Dompierre, Julien, Paul Labbe, Marie-Gabrielle Vallet and Ricardo Camarero
    "How to Subdivide Pyramids, Prisms, and Hexahedra into Tetrahedra", Proceedings, 8th International Meshing Roundtable, South Lake Tahoe, CA, U.S.A., pp.195-204, October 1999
    keywords:
    • pyramid
    • prism
    • hexahedra
    • tetrahedra
    • subdivision
    • conformity
    Abstract
    Download Full Paper (Postscript Format)


Dudley, Clifton R. and Steven J. Owen
    "Degenerate Hex Elements", 23rd International Meshing Roundtable, Elsevier Ltd., October 12-15 2014
    keywords:
    • degenerate hexahedral elements
    • grid-based
    • overlay grid
    • smoothing
    • sculpt
    Abstract
    Download Full Paper (Postscript Format)


Eppstein, David
    "Diamond-Kite Meshes: Adaptive Quadrilateral Meshing and Orthogonal Circle Packing", 21st International Meshing Roundtable, Springer-Verlag, pp.261-277, October 7-10 2012
    keywords:
    • quadrilateral meshes
    • diamond-kite meshes
    Abstract
    Download Full Paper (Postscript Format)


Fogg, Harold J. and Cecil G. Armstrong, Trevor T. Robinson
    "New techniques for enhanced medial axis based decompositions in 2-D", 23rd International Meshing Roundtable, Elsevier Ltd., October 12-15 2014
    keywords:
    • medial axis
    • multiblock decomposition
    • block-structured
    • quad mesh
    Abstract
    Download Full Paper (Postscript Format)


Folwell, Nathan T. and Scott A. Mitchell
    "Reliable Whisker Weaving via Curve Contraction", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.365-378, October 1998
    keywords:
    • hexahedra
    • whisker weaving
    • topology
    • curve contraction
    • advancing front
    Abstract
    Download Full Paper (Postscript Format)


Freitag, Lori A. and Paul E. Plassmann
    "Local Optimization-Based Untangling Algorithms for Quadrilateral Meshes", Proceedings, 10th International Meshing Roundtable, Sandia National Laboratories, pp.397-406, October 7-10 2001
    keywords:
    • quadrilateral
    • untangling
    • improvement
    • quality
    • smoothing
    Abstract
    Download Full Paper (Postscript Format)


Frey, Pascal J. and Loic Marechal
    "Fast Adaptive Quadtree Mesh Generation", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.211-224, October 1998
    keywords:
    • triangle
    • quadtree
    • spatial decomposition
    • adaptivity
    Abstract
    Download Full Paper (Postscript Format)


Gargallo-Peiro, A.,M. Avila, H. Owen, L. Prieto, A. Folch
    "Mesh generation for Atmospheric Boundary Layer simulation in wind farm design and management", 24th International Meshing Roundtable, Elsevier Ltd., October 12-14 2015
    keywords:
    • hybrid meshes
    • hexahedral meshes
    • quadrilateral meshes
    • mesh optimization
    • wind farm
    • wind turbine
    • atmospheric boundary layer
    Abstract
    Download Full Paper (Postscript Format)


Gargallo-Peiro, Abel, Eloi Ruiz-Girones, Xevi Roca,c, Jose Sarrate
    "On curving high-order hexahedral meshes", 24th International Meshing Roundtable, Elsevier Ltd., pp.Research Note, October 12-14 2015
    keywords:
    • unstructured high-order methods
    • hexahedral mesh generation
    • CAD
    • mesh optimization
    • mesh quality
    • curved meshing
    Abstract
    Download Full Paper (Postscript Format)


Guskov, Igor
    "Non-Replicating Indexing for Out-Of-Core Processing of Semi-Regular Triangular Surface Meshes", Proceedings, 13th International Meshing Roundtable, Williamsburg, VA, Sandia National Laboratories, SAND #2004-3765C, pp.39-46, September 19-22 2004
    keywords:
    • data structures
    • external data structures
    • semi-regular surface meshes
    • subdivision
    • surface mesh
    • quadtree
    Abstract
    Download Full Paper (Postscript Format)


Haimes, Robert and Michael J. Aftosmis
    "Watertight Anisotropic Surface Meshing Using Quadrilateral Patches", Proceedings, 13th International Meshing Roundtable, Williamsburg, VA, Sandia National Laboratories, SAND #2004-3765C, pp.311-322, September 19-22 2004
    keywords:
    • surface triangulation
    • anisotropy
    • quadrilateral
    • CAD geometry
    • mapping templates
    Abstract
    Download Full Paper (Postscript Format)


Hariya, Masayuki, Ichiro Nishigaki, Ichiro Kataoka, Yoshimitsu Hiro
    "Automatic Hexahedral Mesh Generation with Feature Line Extraction", Proceedings, 15th International Meshing Roundtable, Springer-Verlag, pp.453-468, September 17-20 2006
    keywords:
    • feature line extraction
    • hexahedra
    • sub-mapping
    • shape recognition
    Abstract
    Download Full Paper (Postscript Format)


Harris, Nathan J., Steven E. Benzley and Steven J. Owen
    "Conformal Refinement of All-Hexahedral Element Meshes Based on Multiple Twist Plane Insertion", Proceedings, 13th International Meshing Roundtable, Williamsburg, VA, Sandia National Laboratories, SAND #2004-3765C, pp.157-168, September 19-22 2004
    keywords:
    • adaptation
    • conformal refinement
    • hexahedra
    • refinement
    • STC
    Abstract
    Download Full Paper (Postscript Format)


Hohmeyer, Michael E., Wayne Christopher
    "Fully-Automatic Object-Based Generation of Hexahedral Meshes", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.129-138, October 1995
    keywords:
    • cartesian grid
    • hexahedron
    Abstract
    Download Full Paper (Postscript Format)


Holmes, David I.
    "Generalized Method of Decomposing Solid Geometry into Hexahedron Finite Elements", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.141-152, October 1995
    keywords:
    • hexahedron
    • mapped meshing
    • medial axis
    • spatial decomposition
    Abstract
    Download Full Paper (Postscript Format)


Hu, Kangkang, Jin Qian, and Yongjie Zhang
    "Adaptive All-Hexahedral Mesh Generation Based on A Hybrid Octree and Bubble Packing", Research Notes, 22nd International Meshing Roundtable, Springer-Verlag, pp.Research Note, October 13-16 2013
    keywords:
    • hybrid octree
    • all-hexahedral mesh
    • adaptation control
    • bubble packing
    • isotropic and anisotropic mesh
    Abstract
    Download Full Paper (Postscript Format)


Hu, Kangkang, Yongjie Jessica Zhang
    "Surface Segmentation and Polycube Construction Based on Generalized Centroidal Voronoi Tessellation", 24th International Meshing Roundtable, Elsevier Ltd., pp.Research Note, October 12-14 2015
    keywords:
    • surface segmentation
    • polycube
    • centroidal Voronoi tessellation
    • all-hexahedral mesh
    Abstract
    Download Full Paper (Postscript Format)


Itoh, Takayuki, Kenji Shimada, Keisuke Inoue, Atsushi Yamada, Tomotake Furuhata
    "Automated Conversion of 2D Triangular Mesh into Quadrilateral Mesh with Directionality Control", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.77-86, October 1998
    keywords:
    • quadrilateral
    • directionality
    • bubble
    • physically-based
    • square packing
    Abstract
    Download Full Paper (Postscript Format)


Jankovich, Steven R., Steven E. Benzley, Jason F. Shepherd and Scott A. Mitchell
    "The Graft Tool: An All-Hexahedral Transition Algorithm for Creating a Multi-Directional Swept Volume Mesh", Proceedings, 8th International Meshing Roundtable, South Lake Tahoe, CA, U.S.A., pp.387-392, October 1999
    keywords:
    • hexahedra
    • refinement
    • sweeping
    • graft tool
    Abstract
    Download Full Paper (Postscript Format)


Jean Hsiang-Chun Lu, Inho Song, William Roshan Quadros, and KenjiShimada
    "Pen-Based User Interface for GeometricDecomposition for Hexahedral MeshGeneration", Proceedings, 19th International Meshing Roundtable, Springer-Verlag, pp.263-278, October 3-6 2010
    keywords:
    • pen-based interface
    • decomposition
    • hexahedral meshing.
    Abstract
    Download Full Paper (Postscript Format)


Jin Qian and Yongjie Zhang
    "Sharp Feature Preservation in Octree-BasedHexahedral Mesh Generation for CADAssembly Models", Proceedings, 19th International Meshing Roundtable, Springer-Verlag, pp.243-262, October 3-6 2010
    keywords:
    • Hexahedral Mesh
    • Sharp Feature
    • Pillowing
    • Quality Improvement
    • CAD Assembly
    • Manifold and Non-Manifold Domain.
    Abstract
    Download Full Paper (Postscript Format)


June, Joseph, Clark Dohrmann, Walt Witkowski, Paul Wolfenbarger, Walter Gerstle, Scott Mitchell, Malcolm Panthaki, Dan Segalman
    "A Global Optimization Approach to Quadrilateral Meshing", Proceedings, 6th International Meshing Roundtable, Sandia National Laboratories, pp.155, October 1997
    keywords:
    • quadrilateral
    • STC
    • whisker weaving
    Abstract
    Download Full Paper (Postscript Format)


Kerr, Robert A., Steven E. Benzley , David White and Scott Mitchell
    "A Method For Controlling Skew on Linked Surfaces", Proceedings, 8th International Meshing Roundtable, South Lake Tahoe, CA, U.S.A., pp.377-385, October 1999
    keywords:
    • skew measure
    • virtual vertex
    • mapped mesh
    • quality
    • quadrilateral
    Abstract
    Download Full Paper (Postscript Format)


Kinney, Paul
    "CleanUp: Improving Quadrilateral Finite Element Meshes", Proceedings, 6th International Meshing Roundtable, Sandia National Laboratories, pp.437-447, October 1997
    keywords:
    • clean-up
    • quadrilateral
    • topology
    Abstract


Kirk Beatty and Nilanjan Mukherjee
    "A Transfinite Meshing Approach for Body-In-White Analyses", Proceedings, 19th International Meshing Roundtable, Springer-Verlag, pp.49-66, October 3-6 2010
    keywords:
    • transfinite
    • mapped
    • attening
    • pseudo-edge
    • Guru edge
    • Protege edge
    • count propagation
    • corner detection
    • parameterization
    • quadrilateral
    • mapping type parameter
    • least squares conformal map.
    Abstract
    Download Full Paper (Postscript Format)


Knupp, Patrick M.
    "Matrix Norms & The Condition Number: A General Framework to Improve Mesh Quality Via Node-Movement", Proceedings, 8th International Meshing Roundtable, South Lake Tahoe, CA, U.S.A., pp.13-22, October 1999
    keywords:
    • mesh optimization
    • shape measures
    • condition number
    • matrix norms
    • finite element mesh
    • tetrahedral mesh
    • hexahedral mesh
    • mesh untangling
    Abstract
    Download Full Paper (Postscript Format)


Knupp, Patrick M.
    "Winslow Smoothing On Two-Dimensional Unstructured Meshes", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.449-457, October 1998
    keywords:
    • winslow smoothing
    • quadrilateral
    • smoothing
    • elliptic smoothing
    Abstract
    Download Full Paper (Postscript Format)


Knupp, Patrick M.
    "Next-Generation Sweep Tool: A Method For Generating All-Hex Meshes On Two-And-One-Half Dimensional Geomtries", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.505-513, October 1998
    keywords:
    • hexahedra
    • sweeping
    • node location
    • Cubit
    Abstract
    Download Full Paper (Postscript Format)


Kober, Cornelia and Matthias Muller-Hannemann
    "Hexahedral Mesh Generation for the Simulation of the Human Mandible", Proceedings, 9th International Meshing Roundtable, Sandia National Laboratories, pp.423-434, October 2000
    keywords:
    • hexahedra
    • quadrilateral
    • optimized mesh smoothing
    • human mandible
    • cycle-elimination
    Abstract
    Download Full Paper (Postscript Format)


Kowalski, N. and F. Ledoux, P. Frey
    "Block-Structured Hexahedral Meshes for CAD Models using 3D Frame Fields", 23rd International Meshing Roundtable, Elsevier Ltd., October 12-15 2014
    keywords:
    • Mesh
    • Hexahedra
    • block-structured
    • Frame fields
    Abstract
    Download Full Paper (Postscript Format)


Kowalski, Nicolas, Franck Ledoux, and Pascal Frey
    "A PDE Based Approach to Multidomain Partitioning and Quadrilateral Meshing", 21st International Meshing Roundtable, Springer-Verlag, pp.137-154, October 7-10 2012
    keywords:
    • mesh generation
    • finite element methods
    • partial differential equations
    • elliptic
    • quadrilateral
    • partitioning
    • multidomain
    Abstract
    Download Full Paper (Postscript Format)


Kraft, Peter
    "Automatic Remeshing With Hexahedral Elements: Problems, Solutions and Applications", Proceedings, 8th International Meshing Roundtable, South Lake Tahoe, CA, U.S.A., pp.357-367, October 1999
    keywords:
    • hexahedra
    • automatic remeshing
    • remeshing
    • octree
    • metal forming
    Abstract
    Download Full Paper (Postscript Format)


Kremer, Michael, David Bommes, Isaak Lim, and Leif Kobbelt
    "Advanced Automatic Hexahedral Mesh Generation from Surface Quad Meshes", 22nd International Meshing Roundtable, Springer-Verlag, pp.147-164, October 13-16 2013
    keywords:
    • automatic
    • hexahedral mesh generation
    • surface mesh
    • quad mesh
    Abstract
    Download Full Paper (Postscript Format)


Kwok, Wa and Zhijian Chen
    "A Simple and Effective Mesh Quality Metric for Hexahedral and Wedge Elements", Proceedings, 9th International Meshing Roundtable, Sandia National Laboratories, pp.325-333, October 2000
    keywords:
    • mesh quality
    • quality
    • mesh metric
    • metric
    • hexahedra
    • wedge
    • mixed elements
    Abstract
    Download Full Paper (Postscript Format)


Ledoux, Franck and Jean-Christophe Weill
    "An Extension of the Reliable Whisker Weaving Algorithm", Proceedings, 16th International Meshing Roundtable, Springer-Verlag, pp.215-232, October 14-17 2007
    keywords:
    • hex mesh generation
    • topology
    • whisker weaving
    • parallel loops
    • geometric properties
    Abstract
    Download Full Paper (Postscript Format)


Ledoux, Franck, Nicolas Le Goff, Steve J. Owen , Matthew L. Staten and Jean-Christophe Weill
    "A Constraint-Based System to Ensure the Preservation of Sharp Geometric Features in Hexahedral Meshes", 21st International Meshing Roundtable, Springer-Verlag, pp.315-332, October 7-10 2012
    keywords:
    • hexahedral mesh modification
    • topology of CAD models
    • fundamental sheets
    • sheet insertion
    • constraint-based system
    Abstract
    Download Full Paper (Postscript Format)


Leland, Robert W., Darryl J. Melander, Ray W. Meyers, Scott A. Mitchell, Timothy J. Tautges
    "The Geode Algorithm: Combining Hex/Tet Plastering, Dicing and Transition Elements for Automatic, All-Hex Mesh Generation", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.515-521, October 1998
    keywords:
    • hexahedra
    • geode template
    • transition
    • plastering
    • dicing
    • Hex-Tet
    Abstract
    Download Full Paper (Postscript Format)


Lemos, Thiago, Suneeta Ramaswami, Marcelo Siqueira
    "An Experimental Comparison of Algorithms for Converting Triangulations of Closed Surfaces into Quadrangulations", 24th International Meshing Roundtable, Elsevier Ltd., pp.Research Note, October 12-14 2015
    keywords:
    • triangulation
    • quadrangulation
    • graph matching
    • edge contraction
    • irreducible triangulation
    Abstract
    Download Full Paper (Postscript Format)


Li, Xiang-Yang, Shang-Hua Teng and Alper Ungor
    "Biting Spheres in 3D", Proceedings, 8th International Meshing Roundtable, South Lake Tahoe, CA, U.S.A., pp.85-95, October 1999
    keywords:
    • quality
    • advancing front
    • plastering
    • sphere packing
    • biting
    • tetrahedra
    Abstract
    Download Full Paper (Postscript Format)


Liu, Shang-Sheng and Rajit Gadh
    "Basic LOgical Bulk Shapes (BLOBS) for Finite Element Hexahedral Mesh Generation", 5th International Meshing Roundtable, Sandia National Laboratories, pp.291-306, October 1996
    keywords:
    • geometry decomposition
    • hexahedron
    • mapping
    Abstract
    Download Full Paper (Postscript Format)


Liu, Shang-Sheng and Rajit Gadh
    "Automatic Hexahedral Mesh Generation by Recursive Convex and Swept Volume Decomposition", Proceedings, 6th International Meshing Roundtable, Sandia National Laboratories, pp.217-231, October 1997
    keywords:
    • hexahedron
    • mapped meshing
    • shape recognition
    • volume decomposition
    Abstract
    Download Full Paper (Postscript Format)


Lober, Randy R., Timothy J. Tautges, Rich A. Cairncross
    "The Parallelization of an Advancing-Front, All-Quadrilateral Meshing Algorithm for Adaptive Analysis", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.59-70, October 1995
    keywords:
    • adaptivity
    • parallel processing
    • paving
    • quadrilateral
    Abstract
    Download Full Paper (Postscript Format)


Lopez, J.I., M. Brovka, J.M. Escobar, J.M. Cascon, and R. Montenegro
    "T-spline Parameterization of 2D Geometries Based on the Meccano Method with a New T-mesh Optimization Algorithm", 22nd International Meshing Roundtable, Springer-Verlag, pp.57-74, October 13-16 2013
    keywords:
    • T-spline parameterization
    • simultaneous mesh untangling and smoothing
    • meccano method
    • isogeometric analysis
    • quadtree
    Abstract
    Download Full Paper (Postscript Format)


Lu, Jean Hsiang-Chun, Inho Song, William Roshan Quadros and Kenji Shimada
    "Volumetric Decomposition via Medial Object and Pen-based User Interface for Hexahedral Mesh Generation", 20th International Meshing Roundtable, Springer-Verlag, pp.179-195, October 23-26 2011
    keywords:
    • 3D medial object
    • pen-based user interface
    • hexahedral mesh generation
    • geometric decomposition
    • sweeping.
    Abstract
    Download Full Paper (Postscript Format)


Lu, Jean Hsiang-Chun, Inho Song, William Roshan Quadros, and Kenji Shimada
    "Geometric Reasoning in Sketch-based Volumetric Decomposition Framework for Hexahedral Meshing", 21st International Meshing Roundtable, Springer-Verlag, pp.297-314, October 7-10 2012
    keywords:
    • 3D medial object
    • geometric reasoning
    • hexahedral meshing
    • sketch-based decomposition
    Abstract
    Download Full Paper (Postscript Format)


Lu, Yong, Rajit Gadh and Timothy J. Tautges
    "Volume Decomposition and Feature Recognition For Hexahedral Mesh Generation", Proceedings, 8th International Meshing Roundtable, South Lake Tahoe, CA, U.S.A., pp.269-280, October 1999
    keywords:
    • hexahedra
    • feature recognition
    • volume decomposition
    • solid modeling
    Abstract
    Download Full Paper (Postscript Format)


Malanthara, Anish and Walter Gerstle
    "Comparative Study of Unstructured Meshes Made of Triangles and Quadrilaterals", Proceedings, 6th International Meshing Roundtable, Sandia National Laboratories, pp.437-447, October 1997
    keywords:
    • comparison
    • quadrilateral
    • quality
    • triangle
    Abstract


Marechal, Loic
    "A New Approach to Octree-Based Hexahedral Meshing", Proceedings, 10th International Meshing Roundtable, Sandia National Laboratories, pp.209-221, October 7-10 2001
    keywords:
    • hexahedra
    • octree
    • conforming patterns
    • mesh adaptation
    • adaptivity
    • grid-based
    • inside-out
    Abstract


Marechal, Loic
    "Advances in Octree-Based All-HexahedralMesh Generation: Handling Sharp Features", Proceedings, 18th International Meshing Roundtable, Springer-Verlag, pp.65-84, October 25-28 2009
    keywords:
    • octree
    • meshing
    • hexahedra
    • adaptation.
    Abstract
    Download Full Paper (Postscript Format)


Merkley, Karl, Corey Ernst, Jason F. Shepherd, and Michael J. Borden
    "Methods and Applications of Generalized Sheet Insertion for Hexahedral Meshing", Proceedings, 16th International Meshing Roundtable, Springer-Verlag, pp.233-250, October 14-17 2007
    keywords:
    • hexahedra
    • meshing
    • dual
    • boundary layers
    • refinement
    Abstract
    Download Full Paper (Postscript Format)


Meyers, Ray J., Timothy J. Tautges, Philip M. Tuchinsky
    "The Hex-Tet Hex-Dominant Meshing Algorithm as Implemented in CUBIT", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.151-158, October 1998
    keywords:
    • hexahedra
    • mixed-element
    • hex-dominant
    • plastering
    • CUBIT
    • Hex-Tet
    • pyramids
    • hybrid
    Abstract
    Download Full Paper (Postscript Format)


Miller, Tim I., Steven E. Benzley, Steven J. Owen, and Matthew L. Staten
    "Using Edge Valence Prediction to Drive Localized All-Hex Coarsening", Research Notes, 20th International Meshing Roundtable, Springer-Verlag, pp.Research Note, October 23-26 2011
    keywords:
    • Hexahedra
    • Coarsening
    • Mesh Topology Modification
    • Edge Valence
    Abstract
    Download Full Paper (Postscript Format)


Min, Weidong
    "Generating Hexahedron-Dominant Mesh Based on Shrinking-Mapping Method", Proceedings, 6th International Meshing Roundtable, Sandia National Laboratories, pp.171-182, October 1997
    keywords:
    • hex-dominant
    • hexahedron
    • mixed element
    Abstract
    Download Full Paper (Postscript Format)


Mingwu, Lai, Steven E. Benzley, Greg Sjaardema and Tim Tautges
    "A Multiple Source and Target Sweeping Method for Generating All-Hexahedral Finite Element Meshes", 5th International Meshing Roundtable, Sandia National Laboratories, pp.217-228, October 1996
    keywords:
    • hexahedron
    • sweeping
    Abstract
    Download Full Paper (Postscript Format)


Miranda, Antonio C. O., Luiz F. Martha
    "Mesh Generation on High-Curvature Surfaces Based on a Background Quadtree Structure", Proceedings, 11th International Meshing Roundtable, Springer-Verlag, pp.333-342, September 15-18 2002
    keywords:
    • mesh generation
    • high-curvature surfaces
    • background quadtree
    • advancing-front technique
    Abstract
    Download Full Paper (Postscript Format)


Miranda, Antonio Carlos de Oliveira and Luiz Fernando Martha
    "Quadrilateral Mesh Generation using Hierarchical Templates", 21st International Meshing Roundtable, Springer-Verlag, pp.279-296, October 7-10 2012
    keywords:
    • template-based mesh
    • structured quadrilateral mesh
    • domain decomposition
    • mapping
    • transition mesh
    Abstract
    Download Full Paper (Postscript Format)


Mitchell, Scott A.
    "The All-Hex Geode-Template for Conforming a Diced Tetrahedral Mesh to any Diced Hexahedral Mesh", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.295-305, October 1998
    keywords:
    • hexahedra
    • tetrahedra
    • conforming
    • transition
    • whisker weaving
    • geode template
    • Cubit
    Abstract
    Download Full Paper (Postscript Format)


Mitchell, Scott A.
    "High Fidelity Interval Assignment", Proceedings, 6th International Meshing Roundtable, Sandia National Laboratories, pp.33-44, October 1997
    keywords:
    • interval assignment
    • line meshing
    • quadrilateral
    Abstract
    Download Full Paper (Postscript Format)


Mitchell, Scott A. and Mohammed A. Mohammed, Ahmed H. Mahmoud, Mohamed S. Ebeida
    "Delaunay quadrangulation by two-coloring vertices", 23rd International Meshing Roundtable, Elsevier Ltd., October 12-15 2014
    keywords:
    • Delaunay
    • quadrangulation
    • graph coloring
    • disk packing
    • blue noise
    • random
    • advancing front
    Abstract
    Download Full Paper (Postscript Format)


Mitchell, Scott A. and Timmothy J. Tautges
    "Pillowing Doublets: Refining A Mesh to Ensure That Faces Share At Most One Edge", Proceedings, 4th Internatinal Meshing Roundtable, Sandia National Laboratories, pp.231-240, October 1995
    keywords:
    • doublet
    • hexahedron
    • plastering
    • refinement
    • whisker weaving
    Abstract
    Download Full Paper (Postscript Format)


Miyoshi, Katsuhiro and Ted Blacker
    "Hexahedral Mesh Generation Using Multi-Axis Cooper Algorithm", Proceedings, 9th International Meshing Roundtable, Sandia National Laboratories, pp.89-97, October 2000
    keywords:
    • hexahedra
    • sweeping
    • cooper tool
    • many-to-many
    • multi-axis
    Abstract
    Download Full Paper (Postscript Format)


Moenickes, Sylvia, Takeo Taniguchi, Rene Kaiser, Werner Zielke
    "A 2.75 D Finite Element Model of 3D Fracture Network Systems", Proceedings, 11th International Meshing Roundtable, Springer-Verlag, pp.161-168, September 15-18 2002
    keywords:
    • mesh generation
    • hexahedral mesh
    • composed domain
    • fracture network
    Abstract
    Download Full Paper (Postscript Format)


Mohamed S. Ebeida, Kaan Karamete, Eric Mestreau, and Saikat Dey
    "Q-TRAN: A New Approach to TransformTriangular Meshes into Quadrilateral MeshesLocally", Proceedings, 19th International Meshing Roundtable, Springer-Verlag, pp.23-34, October 3-6 2010
    keywords:
    • Mesh generation
    • all-quadrilateral
    • indirect methods
    • curved surfaces.
    Abstract
    Download Full Paper (Postscript Format)


Mukherjee, Nilanjan
    "CSALF-Q: A Bricolage Algorithm for Anisotropic Quad Mesh Generation", 20th International Meshing Roundtable, Springer-Verlag, pp.489-509, October 23-26 2011
    keywords:
    • subdivision
    • tri-qua mesher
    • paving
    • transfinite
    • mapped
    • flattening
    • loop
    • loop-paving
    • parameterization
    • quadrilateral
    Abstract
    Download Full Paper (Postscript Format)


Mukherjee, Nilanjan, Bhanu Peddi, Jean Cabello & Michael Hancock
    "Automatic Hexahedral Sweep Mesh Generation of Open Volumes", 21st International Meshing Roundtable, Springer-Verlag, pp.333-347, October 7-10 2012
    keywords:
    • open volume
    • hexahedral meshing
    • sweep
    • void topology
    • void geometry
    • transfinite
    Abstract
    Download Full Paper (Postscript Format)


Muller-Hannemann, Matthias
    "Hexahedral Mesh Generation by Successive Dual Cycle Elimination", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.365-378, October 1998
    keywords:
    • hexahedra
    • whisker weaving
    • dual cycle
    • combinatorial dual
    • hex complex
    • planar graphs
    • cycle elimination
    Abstract
    Download Full Paper (Postscript Format)


Muller-Hannemann, Matthias
    "High Quality Quadrilateral Surface Meshing Without Template Restrictions: A New Approach Based on Network Flow Techniques", Proceedings, 6th International Meshing Roundtable, Sandia National Laboratories, pp.293-307, October 1997
    keywords:
    • quadrilateral
    • surface
    Abstract
    Download Full Paper (Postscript Format)


Muller-Hannemann, Matthias, Cornelia Kober, Robert Sader, Hans-Florian Zeilhofer
    "Anisotropic Validation of Hexahedral Meshes for Composite Materials in Biomechanics", Proceedings, 10th International Meshing Roundtable, Sandia National Laboratories, pp.249-260, October 7-10 2001
    keywords:
    • hexahedra
    • quality
    • optimized mesh smoothing
    • smoothning
    • human mandible
    • biomechanics
    • dual-cycle elimination method
    Abstract
    Download Full Paper (Postscript Format)


Murdoch, Peter and Steven E. Benzley
    "The Spatial Twist Continuum", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.243-251, October 1995
    keywords:
    • hexahedron
    • spatial twist continuum (STC)
    Abstract


Neugebauer, Friedhelm and Ralf Diekmann
    "Improved Mesh Generation: Not Simple but Good", 5th International Meshing Roundtable, Sandia National Laboratories, pp.257-272, October 1996
    keywords:
    • metric
    • provable angle bounds
    • quadtree
    • quality
    • rhomboidal quadtree
    • surface meshing
    • triangle
    Abstract
    Download Full Paper (Postscript Format)


Nowottny, Dietrich
    "Quadrilateral Mesh Generation via Geometrically Optimized Domain Decomposition", Proceedings, 6th International Meshing Roundtable, Sandia National Laboratories, pp.309-320, October 1997
    keywords:
    • geometry decomposition
    • quadrilateral
    • surface
    Abstract
    Download Full Paper (Postscript Format)


Oaks, Wayne and Stefano Paoletti
    "Polyhedral Mesh Generation", Proceedings, 9th International Meshing Roundtable, Sandia National Laboratories, pp.57-67, October 2000
    keywords:
    • polyhedra
    • hexahedra
    • mid-point subdivision
    • computational geometry
    • grid-based
    • inside-out
    Abstract
    Download Full Paper (Postscript Format)


Owen, Steve J.
    "Constrained Triangulation: Application to Hex-Dominant Mesh Generation", Proceedings, 8th International Meshing Roundtable, South Lake Tahoe, CA, U.S.A., pp.31-41, October 1999
    keywords:
    • constrained triangulation
    • hex-dominant mesh generation
    • hexahedra
    • H-Morph
    • tetrahedral transformations
    Abstract
    Download Full Paper (Postscript Format)


Owen, Steven J.
    "A Survey of Unstructured Mesh Generation Technology", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.239-267, October 1998
    keywords:
    • overview
    • classification
    • software
    • triangle
    • quadrilateral
    • tetrahedra
    • hexahedra
    • surface meshing
    • refinement
    • clean-up
    • smoothing
    • Delaunay
    • advancing front
    • octree
    • plastering
    • paving
    • whisker weaving
    • grid-based
    • indirect
    Abstract
    Download Full Paper (Postscript Format)


Owen, Steven J.
    "Parallel Smoothing for Grid-Based Methods", Research Notes, 21st International Meshing Roundtable, Springer-Verlag, pp.Research Note, October 7-10 2012
    keywords:
    • grid-based
    • overlay grid
    • hexahedral mesh generation
    • parallel meshing
    • smoothing
    • optimization
    • mesh quality
    Abstract
    Download Full Paper (Postscript Format)


Owen, Steven J. and Jason F. Shepherd
    "Embedding Features in a Cartesian Grid", Proceedings, 18th International Meshing Roundtable, Springer-Verlag, pp.116-138, October 25-28 2009
    keywords:
    • grid-based
    • overlay grid
    • hexahedral mesh generation
    • topologicalequivalence
    • topology embedding.
    Abstract
    Download Full Paper (Postscript Format)


Owen, Steven J. and Tim R. Shelton
    "Validation of Grid-Based Hex Meshes with Computational Solid Mechaniccs", 22nd International Meshing Roundtable, Springer-Verlag, pp.39-56, October 13-16 2013
    keywords:
    • grid-based
    • overlay grid
    • hexahedral mesh generation
    • parallel meshing
    • solid mechanics
    • pillowing
    Abstract
    Download Full Paper (Postscript Format)


Owen, Steven J., Brett W. Clark, Darryl J. Melander, Michael Brewer, Jason F. Shepherd, Karl Merkley, Corey Ernst, and Randy Morris
    "An Immersive Topology Environment for Meshing", Proceedings, 16th International Meshing Roundtable, Springer-Verlag, pp.553-578, October 14-17 2007
    keywords:
    • geometry simplification
    • sweep decomposition
    • design through analysis
    • hexahedra
    • sweeping
    • assembly meshing
    • imprint/merge
    • meshing user interface
    Abstract
    Download Full Paper (Postscript Format)


Owen, Steven J., Matthew L. Staten, Marguerite C. Sorensen
    "Parallel Hex Meshing from Volume Fractions", 20th International Meshing Roundtable, Springer-Verlag, pp.161-178, October 23-26 2011
    keywords:
    • grid-based
    • overlay grid
    • hexahedral mesh generation
    • parallel meshing
    • non-manifold
    Abstract
    Download Full Paper (Postscript Format)


Owen, Steven J., Matthew L. Staten, Scott A. Canann, and Sunil Saigal
    "Advancing Front Quadrilateral Meshing Using Triangle Transformations", 7th International Meshing Roundtable, Sandia National Labs, pp.409-428, October 1998
    keywords:
    • Q-morph
    • quadrilateral
    • advancing front
    • surface meshing
    • edge recovery
    • surface meshing
    Abstract
    Download Full Paper (Postscript Format)


Owen, Steven J., Ryan M. Shih
    "A Template-Based Approach for Parallel Hexahedral Two-Refinement", 24th International Meshing Roundtable, Elsevier Ltd., October 12-14 2015
    keywords:
    • hexahedron
    • mesh refinement
    • 2-refinement
    • adaptivity
    • parallel
    Abstract
    Download Full Paper (Postscript Format)


Paudel, Gaurab, Steven J. Owen and Steven E. Benzley
    "Hexahedral Mesh Refinement Using an Error Sizing Function", 20th International Meshing Roundtable, Springer-Verlag, pp.143-157, October 23-26 2011
    keywords:
    • hexahedral
    • meshing
    • adaptation
    • refinement
    • sizing function
    • error estimates
    Abstract
    Download Full Paper (Postscript Format)


Pavlakos, Constantine J., Jake S. Jones and Scott A. Mitchell
    "An Immersive Environment for Exploration of CUBIT Meshes", Proceedings, 6th International Meshing Roundtable, Sandia National Laboratories, pp.47-48, October 1997
    keywords:
    • hexahedra
    • mesh visualization
    Abstract
    Download Full Paper (Postscript Format)


Pebay, Philippe P.
    "Planar Quadrangle Quality Measures: Is There Really A Choice ?", Proceedings, 11th International Meshing Roundtable, Springer-Verlag, September 15-18 2002
    keywords:
    • Mesh generation
    • quadrangle meshing
    • mesh quality.
    Abstract
    Download Full Paper (Postscript Format)


Pellenard, Bertrand and Gunay Orbay, James Chen, Shailendra Sohan, Wa Kwok, Joseph R. Tristano
    "QMCF: QMorph Cross Field-Driven Quad-Dominant Meshing Algorithm", 23rd International Meshing Roundtable, Elsevier Ltd., October 12-15 2014
    keywords:
    • Quad-dominant meshing
    • Cross field
    • QMorph
    • Advancing front
    Abstract
    Download Full Paper (Postscript Format)


Pellenard, Bertrand, Pierre Alliez and Jean-Marie Morvan
    "Isotropic 2D Quadrangle Meshing with Size and Orientation Control", 20th International Meshing Roundtable, Springer-Verlag, pp.81-97, October 23-26 2011
    keywords:
    • 2D quadrangle mesh
    Abstract
    Download Full Paper (Postscript Format)


Petrovic, Nemanja, Branko Kolundzija
    "Meshing of Hexagons into Convex Quadrilaterals", Proceedings, 10th International Meshing Roundtable, Sandia National Laboratories, pp.223-233, October 7-10 2001
    keywords:
    • hexagon
    • quadrilateral
    • mesh
    • combinatorial counting
    Abstract
    Download Full Paper (Postscript Format)


Price, Mark, Clive Stops and Geoffrey Butlin
    "A Medial Object Toolkit for Meshing and Other Applications", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.219-229, October 1995
    keywords:
    • Application Programmers Interface (API)
    • dimension reduction
    • feature suppression
    • hexahedron
    • medial axis
    • shelling
    Abstract
    Download Full Paper (Postscript Format)


Qian, Jin, Yongjie Zhang, WenyanWang, Alexis C. Lewis,M.A. Siddiq Qidwai, and Andrew B. Geltmacher
    "Quality Improvement of Non-manifoldHexahedral Meshes for Critical FeatureDetermination of Microstructure Materials", Proceedings, 18th International Meshing Roundtable, Springer-Verlag, pp.211-230, October 25-28 2009
    keywords:
    • Non-manifold hexahedral mesh
    • quality improvement
    • pillowing
    • Bsplinecurve
    • geometric flow
    • optimization
    • microstructure materials.
    Abstract
    Download Full Paper (Postscript Format)


Quadros, W. R., K. Ramaswami, F. B. Prinz and B.Gurumoorthy
    "LayTracks: A New Approach To Automated Quadrilateral Mesh Generation using MAT", Proceedings, 9th International Meshing Roundtable, Sandia National Laboratories, pp.239-250, October 2000
    keywords:
    • lay tracks
    • medial axis
    • quadrilateral
    Abstract
    Download Full Paper (Postscript Format)


Quadros, W.R. and Kenji Shimada
    "Hex-Layer: Layered All-Hex Mesh Generation on Thin Section Solids via Chordal Surface Transformation", Proceedings, 11th International Meshing Roundtable, Springer-Verlag, pp.169-182, September 15-18 2002
    keywords:
    • quadrilateral meshing
    • chordal axis transform
    • medial surface
    • and anisotropic hexahedral mesh generation
    Abstract
    Download Full Paper (Postscript Format)


Quadros, William Roshan
    "LayTracks3D: Mesh Generator for General Assembly Models using Medial Axis Transform", Research Notes, 22nd International Meshing Roundtable, Springer-Verlag, pp.Research Note, October 13-16 2013
    keywords:
    • Medial Axis
    • LayTracks
    • assembly model meshes
    • hexahedral mesh generation
    Abstract
    Download Full Paper (Postscript Format)


Quadros, William Roshan
    "LayTracks3D: a new approach to meshing general solids using medial axis transform", 23rd International Meshing Roundtable, Elsevier Ltd., October 12-15 2014
    keywords:
    • Medial Axis Transforms
    • Hex Mesh Generation
    • Geometry Decomposition
    • Assembly Meshing
    Abstract
    Download Full Paper (Postscript Format)


Rajagopalan, Krishnakumar and Peter R. Eiseman
    "Automatic nested refinement - A technique for the generation of high quality multi-block structured grids for multi-scale problems using GridPro", Proceedings, 12th International Meshing Roundtable, Sandia National Laboratories, pp.277-284, Sept. 2003
    keywords:
    • multi-scale problems
    • multi-block
    • structured
    • nested refinement
    • fractals
    • conformal adaptive hex meshing
    • GridPro
    Abstract
    Download Full Paper (Postscript Format)


Ramaswami, S., M. Siqueira, T. Sundaram, J. Gallier, J. Gee
    "A new algorithm for generating quadrilateral meshes and its application to FE-based image registration", Proceedings, 12th International Meshing Roundtable, Sandia National Laboratories, pp.159-170, Sept. 2003
    keywords:
    • quadrilateral
    • image registration
    • bio-medical
    Abstract
    Download Full Paper (Postscript Format)


Rees, Matthew
    "Combining Quadrilateral and Triangular Meshing Using the Advancing Front Approach", Proceedings, 6th International Meshing Roundtable, Sandia National Laboratories, pp.337-348, October 1997
    keywords:
    • advancing front
    • mixed elements
    • quadrilateral
    • surface
    • triangle
    Abstract
    Download Full Paper (Postscript Format)


Remacle, J.-F., F. Henrotte, T. Carrier Baudouin, C. Geuzaine, E. Bechet, Thibaud Mouton and E. Marchandise
    "A Frontal Delaunay Quad Mesh Generator Using the L-Infinity Norm", 20th International Meshing Roundtable, Springer-Verlag, pp.455-472, October 23-26 2011
    keywords:
    • Quadrilateral mesh generation
    • graph theory
    • infinity norm
    Abstract
    Download Full Paper (Postscript Format)


Roca, X. and J. Sarrate
    "Local Dual Contributions on Simplices: A Tool for Block Meshing", Proceedings, 17th International Meshing Roundtable, Springer-Verlag, pp.513-532, October 12-15 2008
    keywords:
    • Mesh generation
    • dual
    • block decomposition
    • hexahedra
    • quadrilaterals.
    Abstract
    Download Full Paper (Postscript Format)


Roca, Xevi and Josep Sarrate
    "An Automatic and General Least-Squares Projection Procedure for Sweep Meshing", Proceedings, 15th International Meshing Roundtable, Springer-Verlag, pp.487-506, September 17-20 2006
    keywords:
    • hexahedra
    • sweeping
    • node projection
    • affine mapping
    • least-squares
    Abstract
    Download Full Paper (Postscript Format)


Roca, Xevi, Josep Sarrate and Antonio Huerta
    "A new least-squares approximation of affine mappings for sweep algorithms", Proceedings, 14th International Meshing Roundtable, Springer-Verlag, pp.433-448, September 11-14 2005
    keywords:
    • hexahedra
    • node projection
    • smoothing
    • sweeping
    Abstract
    Download Full Paper (Postscript Format)


Roca, Xevi, Josep Sarrate and Antonio Huerta
    "Surface Mesh Projection for Hexahedral Mesh Generation by Sweeping", Proceedings, 13th International Meshing Roundtable, Williamsburg, VA, Sandia National Laboratories, SAND #2004-3765C, pp.169-180, September 19-22 2004
    keywords:
    • sweeping
    • hexahedra
    Abstract
    Download Full Paper (Postscript Format)


Ruiz-Girones, E., X. Roca, and J. Sarrate
    "Combining Size-Preserving and Smoothing Procedures for Adaptive Quadrilateral Mesh Generation", 22nd International Meshing Roundtable, Springer-Verlag, pp.19-37, October 13-16 2013
    keywords:
    • mesh size function
    • background mesh
    • adaptive process
    • quadrilateral mesh
    • gradient-limiting
    • smoothing
    Abstract
    Download Full Paper (Postscript Format)


Ruiz-Girones, Eloi, Xevi Roca, and Josep Sarrate
    "A New Procedure to Compute Imprints inMulti-sweeping Algorithms", Proceedings, 18th International Meshing Roundtable, Springer-Verlag, pp.281-299, October 25-28 2009
    keywords:
    • Finite element method
    • mesh generation
    • hexahedral mesh
    • multisweeping
    • computational domain.
    Abstract
    Download Full Paper (Postscript Format)


Rushdi, Ahmad A., Scott A. Mitchell, Chandrajit L. Bajaj, Mohamed S. Ebeida
    "Robust All-Quad Meshing of Domains with Connected Regions", 24th International Meshing Roundtable, Elsevier Ltd., October 12-14 2015
    keywords:
    • All-Quadrilateral Meshing
    • Guaranteed Quality
    • Sharp Features
    Abstract
    Download Full Paper (Postscript Format)


Sampl, Peter
    "Semi-Structured Mesh Generation Based on Medial Axis", Proceedings, 9th International Meshing Roundtable, Sandia National Laboratories, pp.21-32, October 2000
    keywords:
    • hexahedra
    • medial axis
    • hybrid meshing
    • semi-structured
    • hex-dominant
    Abstract
    Download Full Paper (Postscript Format)


Sastry, Shankar P. and Robert M. Kirby
    "On Interpolation Errors over Quadratic Nodal Triangular Finite Elements", 22nd International Meshing Roundtable, Springer-Verlag, pp.349-366, October 13-16 2013
    keywords:
    • interpolation
    • quadratic nodal triangular elements
    Abstract
    Download Full Paper (Postscript Format)


Schimpf P.H., D.R. Haynor and Y. Kim
    "Automated Meshing of Complex 3-D Domaind From Classified Images", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.193-204, October 1995
    keywords:
    • adaptivity
    • classified images
    • hexahedron
    Abstract
    Download Full Paper (Postscript Format)


Schneiders, R.
    "Automatic Generation of Hexahedral Finite Element Meshes", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.103-114, October 1995
    keywords:
    • grid-based mesh generation
    • hexahedron
    Abstract
    Download Full Paper (Postscript Format)


Schneiders, R., R. Schindler and F. Weiler
    "Octree-based Generation of Hexahedral Element Meshes", 5th International Meshing Roundtable, Sandia National Laboratories, pp.205-216, October 1996
    keywords:
    • grid based
    • hexahedron
    • octree
    Abstract
    Download Full Paper (Postscript Format)


Schneiders, Robert
    "An Algorithm for the Generation of Hexahedral Element Meshes based on an Octree Technique", Proceedings, 6th International Meshing Roundtable, Sandia National Laboratories, pp.183-194, October 1997
    keywords:
    • grid-based
    • hexahedron
    • octree
    Abstract
    Download Full Paper (Postscript Format)


Scott, Michael A., Matthew N. Earp, Steven E. Benzley and Michael B. Stephenson
    "Adaptive Sweeping Techniques", Proceedings, 14th International Meshing Roundtable, Springer-Verlag, pp.417-432, September 11-14 2005
    keywords:
    • decomposition
    • hexahedra
    • node projection
    • smoothing
    • sweeping
    Abstract
    Download Full Paper (Postscript Format)


Sheffer, Alla, Michal Etzion, Ari Rappoport, Michel Bercovier
    "Hexahedral Mesh Generation using the Embedded Voronoi Graph", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.347-364, October 1998
    keywords:
    • hexahedra
    • medial axis
    • Voronoi graph
    Abstract
    Download Full Paper (Postscript Format)


Shepherd, Jason F.
    "Conforming Hexahedral Mesh Generation viaGeometric Capture Methods", Proceedings, 18th International Meshing Roundtable, Springer-Verlag, pp.85-102, October 25-28 2009
    keywords:
    • Hexahedral
    • Mesh
    • Generation
    • Dual
    • Topology Modification.
    Abstract
    Download Full Paper (Postscript Format)


Shepherd, Jason, Scott A. Mitchell, Patrick Knupp, and David White
    "Methods for Multisweep Automation", Proceedings, 9th International Meshing Roundtable, Sandia National Laboratories, pp.77-87, October 2000
    keywords:
    • hexahedra
    • sweeping
    • multisweep
    • automation
    • many-to-many
    Abstract
    Download Full Paper (Postscript Format)


Shih, Bih-Yaw and Hiroshi Sakurai
    "Automated Hexahedral Mesh Generation by Swept Volume Decomposition and Recomposition", 5th International Meshing Roundtable, Sandia National Laboratories, pp.273-280, October 1996
    keywords:
    • hexahedron
    • sweeping
    Abstract
    Download Full Paper (Postscript Format)


Shih, Bih-Yaw and Hiroshi Sakurai
    "Shape Recognition and Shape-Specific Meshing for Generating All Hexahedral Meshes", Proceedings, 6th International Meshing Roundtable, Sandia National Laboratories, pp.197-209, October 1997
    keywords:
    • hexahedron
    • mapped meshing
    • shape recognition
    • volume decomposition
    Abstract


Shimada, Kenji, Jia-Huei Liao and Takayuki Itoh
    "Quadrilateral Meshing with Directionality Control through the Packing of Square Cells", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.61-76, October 1998
    keywords:
    • quadrilateral
    • directionality
    • Voronoi
    • Delaunay
    • bubble
    • physically-based
    Abstract
    Download Full Paper (Postscript Format)


Staten, Matthew L., Robert A. Kerr, Steven J. Owen, Ted D. Blacker
    "Unconstrained Paving and Plastering: Progress Update", Proceedings, 15th International Meshing Roundtable, Springer-Verlag, pp.469-486, September 17-20 2006
    keywords:
    • unconstrained plastering
    • unconstrained paving
    • hexahedra
    • quadrilateral
    Abstract
    Download Full Paper (Postscript Format)


Staten, Matthew L., Scott A. Canann, and Steve J. Owen
    "BMSWEEP: Locating Interior Nodes During Sweeping", 7th International Meshing Roundtable, Sandia National Labs, pp.7-18, October 1998
    keywords:
    • hexahedra
    • sweeping
    • node location
    • BMSweep
    Abstract
    Download Full Paper (Postscript Format)


Staten, Matthew L., Steven J. Owen, Ted D. Blacker
    "Unconstrained Paving & Plastering: A New Idea for All Hexahedral Mesh Generation", Proceedings, 14th International Meshing Roundtable, Springer-Verlag, pp.399-416, September 11-14 2005
    keywords:
    • hexahedra
    • plastering
    • sweeping
    • paving
    Abstract
    Download Full Paper (Postscript Format)


Steinbrenner, John P. and John Chawner
    "Gridgen's Implementation of Partial Differential Equation baste Stuctured Grid Generation Methods", Proceedings, 8th International Meshing Roundtable, South Lake Tahoe, CA, U.S.A., pp.143-152, October 1999
    keywords:
    • grid generation
    • partial differential equation methods
    • hyperbolic PDE
    • elliptic PDE
    • structured grid methods
    • quadrilateral
    • hexahedral
    Abstract
    Download Full Paper (Postscript Format)


Suzuki, Tatsuhiko, Shigeo Takahashi, Jason Shepherd
    "An Interior Surface Generation Method for All-Hexahedral Meshing", Proceedings, 14th International Meshing Roundtable, Springer-Verlag, pp.377-398, September 11-14 2005
    keywords:
    • hexahedra
    • interior surface arrangement
    • Schneiders' pyramid
    • dual hexahedra
    • STC
    • dual cycle
    Abstract
    Download Full Paper (Postscript Format)


Suflner, Gerd and Gunther Greiner
    "Hexagonal Delaunay Triangulation", Proceedings, 18th International Meshing Roundtable, Springer-Verlag, pp.519-538, October 25-28 2009
    keywords:
    • Unstructured Mesh Generation
    • Delaunay Triangulation
    • GuaranteedAngle Bounds
    • Hexagon Subdivision.
    Abstract
    Download Full Paper (Postscript Format)


Taghavi, Reza
    "Automatic Block Decomposition Using Fuzzy Logic Analysis", Proceedings, 9th International Meshing Roundtable, Sandia National Laboratories, pp.187-192, October 2000
    keywords:
    • hexahedra
    • block-decomposition
    • fuzzy logic
    Abstract
    Download Full Paper (Postscript Format)


Tautges, Timothy J. and Sarah E. Knoop
    "Topology modification of hexahedral meshes using atomic dual-based operations", Proceedings, 12th International Meshing Roundtable, Sandia National Laboratories, pp.415-423, Sept. 2003
    keywords:
    • hexahedra
    • arrangements
    • dual
    • simple polytope
    • hex topology operators
    • topology improvement
    • STC
    Abstract
    Download Full Paper (Postscript Format)


Tautges, Timothy J. and Scott A. Mitchell
    "Whisker Weaving: Invalid Connectivity Resolution and Primal Construction Algorithm", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.115-127, October 1995
    keywords:
    • clean-up
    • hexahedron
    • spatial twist continuum (STC)
    • whisker weaving
    Abstract
    Download Full Paper (Postscript Format)


Tautges, Timothy J., David R. White and Robert W. Leland
    "Twelve Ways to Fool the Masses When Describing Mesh Generation Performance", Proceedings, 13th International Meshing Roundtable, Williamsburg, VA, Sandia National Laboratories, SAND #2004-3765C, pp.181-190, September 19-22 2004
    keywords:
    • hexahedra
    • quadrilateral
    • geometry decomposition
    • classification
    • overview
    Abstract
    Download Full Paper (Postscript Format)


Tchon, Ko-Foa and Ricardo Camarero
    "Quad-Dominant Mesh Adaptation Using Specialized Simplicial Optimization", Proceedings, 15th International Meshing Roundtable, Springer-Verlag, pp.21-38, September 17-20 2006
    keywords:
    • quad-dominant
    • adaptivity
    • anisotropy
    • Riemannian metric
    Abstract
    Download Full Paper (Postscript Format)


Tchon, Ko-Foa, Julien Dompierre and Ricardo Camarero
    "Conformal Refinement of All-Quadrilateral and All-Hexahedral Meshes According to an Anisotropic Metric", Proceedings, 11th International Meshing Roundtable, Springer-Verlag, pp.231-242, September 15-18 2002
    keywords:
    • unstructured mesh
    • quadrilateral
    • hexahedral
    • conformal refinement
    • anisotropic metric
    Abstract
    Download Full Paper (Postscript Format)


Thompson, David S. and Bharat K. Soni
    "Generation of Quad and Hex Dominant Semistructured Meshes Using An Advancing Layer Scheme", Proceedings, 8th International Meshing Roundtable, South Lake Tahoe, CA, U.S.A., pp.171-178, October 1999
    keywords:
    • semistructured
    • quad dominant
    • hex dominant
    • advancing layer
    • structured
    • hybrid
    • CFD
    Abstract
    Download Full Paper (Postscript Format)


Tierney, Christopher M., Liang Sun, Trevor T. Robinson, Cecil G. Armstrong
    "Generating analysis topology using virtual topology operators", 24th International Meshing Roundtable, Elsevier Ltd., October 12-14 2015
    keywords:
    • Virtual Topology
    • decomposition
    • hex meshing algorithms
    Abstract
    Download Full Paper (Postscript Format)


Tishkin, Vladimir and Konstantin Bogomolov
    "Adaptive High-Aspect Ratio Structured 2-D Grids", Proceedings, 9th International Meshing Roundtable, Sandia National Laboratories, pp.193-204, October 2000
    keywords:
    • mesh optimization
    • optimization
    • adaptivity
    • quadrilateral
    • structured
    • anisotropy
    • boundary layer
    • thin layer
    Abstract
    Download Full Paper (Postscript Format)


Tu, Tiankai and David R. OíHallaron
    "Extracting Hexahedral Mesh Structures from Balanced Linear Octrees", Proceedings, 13th International Meshing Roundtable, Williamsburg, VA, Sandia National Laboratories, SAND #2004-3765C, pp.191-200, September 19-22 2004
    keywords:
    • balanced linear octree
    • hexahedra
    • database
    • two-level bucket sort
    • dangling and anchored nodes
    • octree
    • data structures
    Abstract
    Download Full Paper (Postscript Format)


Tuchinsky, Philip M. and Brett W. Clark
    "The HexTet Hex-Dominant Automesher: An Interim Progress Report", Proceedings, 6th International Meshing Roundtable, Sandia National Laboratories, pp.183-194, October 1997
    keywords:
    • hex-dominant
    • hexahedron
    • mixed element
    • plastering
    Abstract


Turkiyyah, George, M., Duane W. Storti, Mark Ganter, Hao Chen
    "A Skeleton-Based Approach to Automated Hexahedral Mesh Generation for Solid Models", Proceeding, 4th International Meshing Roundtable, Sandia National Laboratories, pp.late addition, October 1995
    keywords:
    • hexahedron
    • medial axis
    • skeleton-based
    Abstract


Verma, Chaman Singh , Paul F. Fischer, Seung E. Lee, and F. Loth
    "An All-Hex Meshing Strategy for Bifurcation Geometries in Vascular Flow Simulation", Proceedings, 14th International Meshing Roundtable, Springer-Verlag, pp.363-376, September 11-14 2005
    keywords:
    • hexahedra
    • biforcation geometries
    • artery meshing
    • sweeping
    • grafting
    • bio-medical
    Abstract
    Download Full Paper (Postscript Format)


Verma, Chaman Singh, Krishnan Suresh
    "A Robust Combinatorial Approach to Reduce Singularities in Quadrilateral Meshes", 24th International Meshing Roundtable, Elsevier Ltd., October 12-14 2015
    keywords:
    • Quadrilateral mesh generation
    • Singularities
    • Quad templates
    Abstract
    Download Full Paper (Postscript Format)


Viswanath, Naveen, Kenji Shimada, Takayuki Itoh
    "Quadrilateral Meshing with Anisotropy and Directionality Control via Close Packing of Rectangular Cells", Proceedings, 9th International Meshing Roundtable, Sandia National Laboratories, pp.217-225, October 2000
    keywords:
    • anisotropy
    • computational geometry
    • quadrilateral
    • circumcircle test
    • bubble packing
    • Delaunay
    • quadrilateral packing
    Abstract
    Download Full Paper (Postscript Format)


Walton, Kirk S., Steven E. Benzley, Jason Shepherd
    "Sculpting: An Improved Inside-Out Scheme for All-Hexahedral Meshing", Proceedings, 11th International Meshing Roundtable, Springer-Verlag, pp.153-160, September 15-18 2002
    keywords:
    • mesh generation
    • hexahedral meshing
    Abstract
    Download Full Paper (Postscript Format)


Wang, Feng and Luca di Mare
    "Automated Hex Meshing For Turbomachinery Secondary Air System", 21st International Meshing Roundtable, Springer-Verlag, pp.549-566, October 7-10 2012
    keywords:
    • hexahedral meshes
    • turbomachinery
    • pave-sweep
    • sheet-insertion
    Abstract
    Download Full Paper (Postscript Format)


Wang, Jun and Zeyun Yu
    "A Novel Method for Surface Mesh Smoothing:Applications in Biomedical Modeling", Proceedings, 18th International Meshing Roundtable, Springer-Verlag, pp.195-210, October 25-28 2009
    keywords:
    • Surface mesh smoothing
    • Quadric surface fitting
    • Curvature labeling
    • Meshquality improvement.
    Abstract
    Download Full Paper (Postscript Format)


Wang, Rui, Chun Shen, Jinming Chen, Shuming Gao, Haiyan Wu
    "Automated Block Decomposition of Solid Models Based on Sheet Operations", 24th International Meshing Roundtable, Elsevier Ltd., October 12-14 2015
    keywords:
    • block decomposition
    • hex mesh
    • mesh generation
    • sheet operation
    • topological quality
    • geometric validity
    Abstract
    Download Full Paper (Postscript Format)


White, David R. and Paul Kinney
    "Redesign of the Paving Algorithm: Robustness Enhancements through Element by Element Meshing", Proceedings, 6th International Meshing Roundtable, Sandia National Laboratories, pp.323-335, October 1997
    keywords:
    • advancing front
    • paving
    • quadrilateral
    • surface
    Abstract
    Download Full Paper (Postscript Format)


White, David R., Lai Mingwu, Steven E. Benzley, and Gregory D. Sjaardema
    "Automated Hexahedral Mesh Generation by Virtual Decomposition", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.165-176, October 1995
    keywords:
    • hexahedron
    • mapped meshing
    • spatial decomposition
    • sweeping
    Abstract
    Download Full Paper (Postscript Format)


Wolfenbarger, Paul, Joseph Jung, Clark R. Dohrmann, Walter R. Witkowski, Malcolm J. Panthaki, Walter H. Gerstle
    "A Global Minimization-Based, Automatic Quadrilateral Meshing Algorithm", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.87-103, October 1998
    keywords:
    • quadrilateral
    • whisker weaving
    • global minimization-based meshing
    Abstract
    Download Full Paper (Postscript Format)


Woodbury, Adam C., Jason F. Shepherd, Matthew L. Statenand Steven E. Benzley
    "Localized Coarsening of ConformingAll-Hexahedral Meshes", Proceedings, 17th International Meshing Roundtable, Springer-Verlag, pp.603-618, October 12-15 2008
    keywords:
    • Hexahedral
    • Mesh
    • Coarsening
    • Simplification
    • Adaptivity
    • Refinement.
    Abstract
    Download Full Paper (Postscript Format)


Wu, Haiyan and Shuming Gao
    "Automatic swept volume decomposition based on sweep directions extraction for hexahedral meshing", 23rd International Meshing Roundtable, Elsevier Ltd., October 12-15 2014
    keywords:
    • volume decomposition
    • hexahedral mesh
    • mesh generation
    • swept volume
    • sweep direction
    Abstract
    Download Full Paper (Postscript Format)


Xevi Roca, Eloi Ruiz-Giron¥es, and Josep Sarrate
    "Receding Front Method: a New Approach Applied toGenerate Hexahedral Meshes of Outer Domains", Proceedings, 19th International Meshing Roundtable, Springer-Verlag, pp.209-226, October 3-6 2010
    keywords:
    • Mesh generation
    • unstructured hexahedra
    • eikonal equation.
    Abstract
    Download Full Paper (Postscript Format)


Xinghua Liang and Yongjie Zhang
    "Hexagon-Based All-Quadrilateral MeshGeneration with Guaranteed Angle Bounds", Proceedings, 19th International Meshing Roundtable, Springer-Verlag, pp.1-22, October 3-6 2010
    keywords:
    • Quadrilateral mesh
    • guaranteed angle bound
    • hexagon-tree
    • sharp fea-ture
    • narrow region.
    Abstract
    Download Full Paper (Postscript Format)


Xiong, Guanglei, Suraj Musuvathy, and Tong Fang
    "Automated Structured All-Quadrilateral and Hexahedral Meshing of Tubular Surfaces", 21st International Meshing Roundtable, Springer-Verlag, pp.103-120, October 7-10 2012
    keywords:
    • quadrilateral meshes
    • hexahedral meshes
    • tubular surfaces
    • automated
    • structured
    • Catmull-Clark
    Abstract
    Download Full Paper (Postscript Format)


Xu, Jing and Audrey N. Chernikov
    "A Guaranteed Quality Boundary Graded Triangular Meshing Algorithm Backed by a Computer-Assisted Proof", Research Notes, 22nd International Meshing Roundtable, Springer-Verlag, pp.Research Note, October 13-16 2013
    keywords:
    • mesh generation
    • angle bounds
    • quadtree
    Abstract
    Download Full Paper (Postscript Format)


Yamada, Atsushi, Keisuke Inoue, Takayuki Itoh and Kenji Shimada
    "An Approach for Generating Meshes Similar to A Reference Mesh", Proceedings, 9th International Meshing Roundtable, Sandia National Laboratories, pp.101-109, October 2000
    keywords:
    • tensor field
    • quadrilateral
    • mesh copy
    • copy
    • surface meshing
    Abstract
    Download Full Paper (Postscript Format)


Yamakawa, Soji and Kenji Shimada
    "Hexhoop: Modular Templates For Converting A Hex-Dominant Mesh To An All-Hex Mesh", Proceedings, 10th International Meshing Roundtable, Sandia National Laboratories, pp.235-246, October 7-10 2001
    keywords:
    • mesh conversion
    • template
    • hexahedra
    • hex-dominant
    • pyramid
    • Schneider's open problem
    • hexhoop
    • geode
    Abstract
    Download Full Paper (Postscript Format)


Yamakawa, Soji and Kenji Shimada
    "Increasing the number and volume of hexahedral and prism elements in a hex-dominant mesh by topological transformations", Proceedings, 12th International Meshing Roundtable, Sandia National Laboratories, pp.403-413, Sept. 2003
    keywords:
    • hex-dominant
    • topological transformation
    • hexahedra
    • mixed elements
    • prism element
    Abstract
    Download Full Paper (Postscript Format)


Yamakawa, Soji and Kenji Shimada
    "Improving Element-Boundary Alignment in All-Hex Meshes of Thin-Walled Solids by Side-Face Identification", 21st International Meshing Roundtable, Springer-Verlag, pp.513-529, October 7-10 2012
    keywords:
    • thin-walled solids
    • hexahedral meshes
    • conformal transformation
    Abstract
    Download Full Paper (Postscript Format)


Yang, Nicholas C., Andrew S. Forsberg, Jason F. Shepherd, Ricardo M. Garcia and Karl G. Merkley
    "MARK-IT: A Marking User Interface For Cutting Decomposition Time", Proceedings, 13th International Meshing Roundtable, Williamsburg, VA, Sandia National Laboratories, SAND #2004-3765C, pp.231-242, September 19-22 2004
    keywords:
    • decomposition
    • marking user interface
    • gestural commands
    • time-to-mesh
    • post-WIMP
    • hexahedra
    • user interface
    Abstract
    Download Full Paper (Postscript Format)


Zhang, Yongjie and Chandrajit Bajaj
    "Adaptive and Quality Quadrilateral/Hexahedral Meshing from Volumetric Data", Proceedings, 13th International Meshing Roundtable, Williamsburg, VA, Sandia National Laboratories, SAND #2004-3765C, pp.365-376, September 19-22 2004
    keywords:
    • quadrilateral
    • hexahedra mesh
    • topology preservation
    • adaptivity
    • quality mesh
    Abstract
    Download Full Paper (Postscript Format)


Zhang, Yongjie, Chandrajit Bajaj, and Guoliang Xu
    "Surface Smoothing and Quality Improvement of Quadrilateral/Hexahedral Meshes with Geometric Flow", Proceedings, 14th International Meshing Roundtable, Springer-Verlag, pp.449-468, September 11-14 2005
    keywords:
    • quadrilateral
    • hexahedra
    • surface smoothing
    • feature preservation
    • quality improvement
    • geometric flow
    Abstract
    Download Full Paper (Postscript Format)


Zhang, Yongjie, Xinghua Liang, and Guoliang Xu
    "A Robust 2-Refinement Algorithm in Octree and Rhombic Dodecahedral Tree Based All-Hexahedral Mesh Generation", 21st International Meshing Roundtable, Springer-Verlag, pp.155-172, October 7-10 2012
    keywords:
    • 2-refinement
    • all-hexahedral mesh
    • octree
    • rhombic dodecahedron
    • sharp feature
    Abstract
    Download Full Paper (Postscript Format)


Zhang, Yongjie, Yuri Bazilevs, Samrat Goswami, Chandrajit L. Bajaj, and Thomas J.R. Hughes
    "Patient-Specific Vascular NURBS Modeling for Isogeometric Analysis of Blood Flow", Proceedings, 15th International Meshing Roundtable, Springer-Verlag, pp.73-92, September 17-20 2006
    keywords:
    • hexahedra
    • Patient-specific vascular models
    • hexahedral mesh
    • skeleton-based sweeping
    • NURBS
    • isogeometric analysis
    • blood flow
    Abstract
    Download Full Paper (Postscript Format)


Zhou, Tian and Kenji Shimada
    "An Angle-Based Approach to Two-Dimensional Mesh Smoothing", Proceedings, 9th International Meshing Roundtable, Sandia National Laboratories, pp.373-384, October 2000
    keywords:
    • smoothing
    • average angle
    • Laplacian
    • optimization-based
    • triangule
    • quadrilateral
    Abstract
    Download Full Paper (Postscript Format)


Zhu, Hua and Jinming Chen, Haiyan Wu, Shuming Gao
    "Direct editing on hexahedral mesh through dual operations", 23rd International Meshing Roundtable, Elsevier Ltd., October 12-15 2014
    keywords:
    • direct editing
    • hexahedral mesh
    • mesh deformation
    • local refinement
    • mesh coarsening
    • fundamental mesh
    • adaptive meshing
    Abstract
    Download Full Paper (Postscript Format)


Contact author(s) or publisher for availability and copyright information on above referenced articles